Model LXB4080 Development Board

Overview
The LXB4080 Development Board is a full-length PCI form factor printed circuit board. It supports development of ASICs, software and hardware designs based on the Lexra LX4080 CPU core and other SmoothCore components. The development board is an ideal platform for development, debug and verification of software code prior to the availability of your ASIC and/or target hardware. It also allows prototyping of coprocessors, custom engines, and Lexra Bus components that will eventually be integrated into an ASIC.

The LXB4080 development board may be used with a stand-alone PCI backplane or with a host PCI backplane. EPI offers both a Galileo PCI backplane and a PC motherboard as optional accessories.

The board is populated with a Lexra LX4080 Test Chip, some PLDs, a Galileo 64060 interface controller, a boot PROM, two PLLs, a dual UART, a set of bus transceivers, and a DRAM SIMM socket. Connectors are available for the two serial ports, for access to the Lexra Bus, and for access to the Custom Engine and Coprocessor2 interfaces.

Embedded Performance, Inc. (EPI), 606 Valley Way, Milpitas, CA 95035-4138. Tel: 408-957-0350; Fax: 408-957-0307.