PhyCORE-167/CAN

Source: PHYTEC America LLC

The phyCORE-167/CAN is intended for use in memory-intensive applications and in driving a CAN-bus interface

Details

Technical Highlights:

Sub credit card-sized SBC fitted with Infineon SAB-C167CR/CS controller with on-chip full CAN 2.0B

Instruction cycle time of 100 ns. at 20 MHz. clock speed in 16-bit, non-multiplexed bus-mode

16-channel A/D-converter with 10-bit resolution

16 MB address field

256 KB (to 2 MB) SRAM on-board and 256 KB (to 2 MB)

Flash on-board

battery-buffered Real-Time-Clock and SRAM (to 1 MB)

Two RS-232 transceivers, one configurable as RS-485

Full 2.0B CAN-bus with optional UART in place of second asynchronous interface

provision for operation with in-circuit emulators (such as ICE connect-16x)

requires only +5V./250 mA. power source in a temperature range of 0... 70 degree C.

The phyCORE-167/CAN is intended for use in memory-intensive applications and in driving a CAN-bus interface. Smaller than a credit card (55 by 47 mm.), the standard board is equipped with a Infineon SAB C167CR/CS controller as well as an integral real-time clock which, like the RAM, can be buffered by an external battery. The standard module runs at a 20 MHz clock speed (delivering 100 instruction cycles/ns) and offers 256 KB (up to 2 MB) SRAM and Flash on-board for DATA and CODE storage.

The phyCORE-167/CAN is fitted with two RS-232 transceivers, UART in place of a second asynchronous serial interface and CAN-bus interface. All controller signals and ports extend to pin rows aligning three edges of the board. These pins provide a 16-bit bidirectional I/O port and 64+ free port lines, including 16 analog inputs with 10-bit resolution. The phyCORE-167/CAN has an industrial temperature range from 0 to 70 degrees C. (with extended range from -40 to 85 degrees C.) and requires only a 250 mA. power source. The board can be programmed with the included compiler, assembly, and debugger evaluation software. PHYTEC FlashTools enable easy on-board download of user programs.

PHYTEC America LLC, 255 Ericksen Ave NE, Bainbridge Island, WA 98110. Tel: 206-780-9047; Fax: 206-780-9135.

Free Embedded Technology.com Newsletter