Product/Service
PhyCore-Xacx
Source: PHYTEC America LLC
The XA's compatibility mode enables easy migration from 8051-compatible devices to this 16-bit architecture
Technical Highlights:Single Board Computer in subminiature dimensions (55 x 47 mm.) according to phyCORE specifications
populated with Philips 16-bit XA-C3 microcontroller (PLCC-44, 32 MHz clock frequency) featuring on-chip CAN 2.0B on-chip via Philips PeliCAN
all ports and decoded interface-signals extend to standard 2.54 mm. pitch pin header rows aligning the edges of the circuit board
flexible address decoding and generation of three /CS-signals and different memory models
256 KB (to 2 MB) external Flash with included PHYTEC FlashTools download utility for in-system (ISP) Flash programming
256 KB (to 1 MB) external SRAM devices
2 KB external SPI-EEPROM
RS-232 or RS-485 serial interface (jumper selectable)
Philips 82C251 CAN transceiver
on-chip SPI interface
PHYTEC Remote Supervisor Circuit RSC1308, enabling remote boot load and Flash download
I²C Real Time Clock with internal quartz
requires single 5V power supply
on-chip SPI interface
The XA's compatibility mode enables easy migration from 8051-compatible devices to this 16-bit architecture. For memory extensive applications, this microcontroller enables memory models with up to 1 MB for CODE as well as XDATA memory. With the help of a software-configurable PLD, the address area for CODE space can be extended up to 2 MB.
PHYTEC America LLC, 255 Ericksen Ave NE, Bainbridge Island, WA 98110. Tel: 206-780-9047; Fax: 206-780-9135.
