Product/Service
phyCORE-167/168
phyCORE-167/168
16-bit Subminiature CAN Power
The high performance Infineon SABC167CR and ST Microelectronic ST10F168 micocontrollers are now supported by PHYTEC's new phyCORE Single Board Computer family.
The standard memory configuration of the board features 256 (up to 2 MB) KB SRAM, 256 (up to 2 MB) KB Flash and 4 KB EEPROM. The Flash device enables on-board programming with the included PHYTEC FlashTools firmware. These pins provide a 16-bit bi-directional I/O port, 64+ free port lines, a 16-channel A/D-converter with 10-bit resolution, two serial interfaces via RS-232/485 and one CAN interface.
Ordering Code: KPCM-009
Standard Rapid Development Kit
phyCORE-167CR; QuickStart Manual; Schematics and PHYTEC Spectrum CD-ROM with controller User's Manual, board Hardware Manual, PHYTEC FlashTools download utility and ApNotes.
Availability:
Quarter 4 / 2000
· Single Board Computer in subminiature dimensions (55 x 47 mm.) according to phyCORE specifications
· populated with the Infineon SABC167CR or ST Microelectronic ST10F168 microcontroller (QFP144, 20 MHz clock frequency) featuring on-chip 2.0B CAN and (if populated with the ST10F168) 256 KB on-chip Flash
· all controller ports and decoded interface signals extend to high density (0.625 mm.) header pins aligning two edges of the circuit board
· flexible address decoding and generation of free /CS-signals and different memory models
· 256 KB (to 2 MB) external Flash with PHYTEC FlashTools download utility for on-board Flash programming
· 256 KB (to 2 MB) external SRAM
· 16-channel A/D-converter with 10-bit resolution
· RS-232 transceiver supports two serial interfaces, as well as configuration of memory models and download of user code into Flash memory
· UART supports second asynchronous serial interface
· Full CAN 2.0B interface
· PHYTEC RSC1308 Remote Supervisory Circuit enabling remote boot and Flash download
· Real-Time Clock with 256 bytes memory
· operates within a standard industrial temperature range of 0 to 70