Product/Service
phyCORE-591
phyCORE-591
Full Philips 2.0B CAN in Tiny Dimensions
The phyCORE-591 is the first PHYTEC new generation Single Board Computer. It is populated with Philips P8xC591 controller which features CAN 2.0B on-chip via Philips PeliCAN, which offers both 11-bit and 29-bit message identifier support, an extended receipt buffer of up to 64 bytes and integrated protocol support for CANopen, DeviceNet and OSEK. These features render the P8xC591 an excellent solution for insertion in a wide spectrum of CAN applications. The CAN transceiver and serial EEPROM on the phyCORE module provide additional CAN support by enabling storage of configuration data (network parameters).
Ordering Code: PC-002
phyCORE-591; QuickStart Manual; Schematics and PHYTEC Spectrum CD-ROM with controller User's Manual, board Hardware Manual, PHYTEC FlashTools download utility and ApNotes.
Availability:
November 1999
· Single Board Computer in subminiature dimensions (55 x 40 mm.) according to phyCORE specifications
· populated with Philips 8-bit, 80C51-compatible P8xC591 microcontroller (PLCC-44, 12 MHz clock frequency) featuring CAN 2.0B on-chip via Philips PeliCAN
· all ports and decoded interface-signals extend to standard 2.54 pitch pin header rows aligning the edges of the circuit board
· flexible address decoding and generation of three /CS-signals and different memory models
· 128 (to 512) KB external Flash with PHYTEC FlashTools download utility for in-system (ISP) Flash programming
· 128 KB external SRAM
· 1 (to 32) KB external serial I²C-EEPROM (alternatively I²C-SRAM or FRAM)
· RS-232 or RS-485 serial interface (jumper selectable)
· Philips 82C251 CAN transceiver
· PHYTEC Remote Supervisor Circuit RSC1308, enabling remote boot load and Flash download
· I²C Real Time Clock with internal quartz
· requires single 5V power supply