phyCORE-XAGx
phyCORE-XAGx
64-bit STPC Power in PC/104 Standards
In contrast to microcontrollers offering on-chip OTP, on-chip Flash of the XAG49 enables flexible on-board reprogramming during development, as well as upgrading via RS-232 of user code stored in hardware that is already implemened in the field. The XA's compatibility mode enables easy migration from 8051-compatible devices to this 16-bit architecture. For memory extensive applications, this microcontroller enables memory models with up to 1 MB for CODE as well as XDATA memory.
Ordering Code:
PC-003phyCORE-XAC3; QuickStart Manual; Schematics and PHYTEC Spectrum CD-ROM with controller User's Manual, board Hardware Manual, PHYTEC FlashTools download utility and ApNotes.
Availability:
November 1999
· Single Board Computer in subminiature dimensions (55 x 47 mm.) according to phyCORE specifications
· populated with Philips 16-bit XA-G49 microcontroller (PLCC-44, 30 MHz clock frequency) featuring on-chip Flash
· all ports and decoded interface-signals extend to standard 2.54 mm. pitch pin header rows aligning the edges of the circuit board
· flexible address decoding and generation of three /CS-signals and different memory models
· 64 KB on-chip Flash and 256 KB (to 1 MB) external Flash with PHYTEC FlashTools download utility for in-system (ISP) Flash programming
· 256 KB (to 1 MB) external SRAM devices (SO, SOJ, battery backup)
· 1 (to 32) KB external serial I²C-EEPROM (alternatively I²C-SRAM or FRAM)
· two serial RS-232 and/or RS-485 serial interfaces (jumper selectable)
· PHYTEC Remote Supervisor Circuit RSC1308, enabling remote boot load and Flash download
· I²C Real Time Clock with internal quartz
PHYTEC America LLC, 255 Ericksen Ave NE, Bainbridge Island, WA 98110. Tel: 206-780-9047; Fax: 206-780-9135.