AI-VSW-12FP Video Cross-Point Switch

The AI-VSW-12FP Video Cross-Point Switch is a 12-channel-input to 12-channel-output video cross-point switch. This product conforms to the VMEbus form-factor and provides the connection of any of 12 video input channels to any of 12 video output ports through a 12-by-12 cross-point switch. The cross-point switch operates through a micro-controller which provides all of the operational functions of the system. An Eeprom is used to provide non-volatile storage of cross-point configuration information that is used to restore the operational state of the system at power-on. The VMEbus interface consists of two consecutive locations in Short I/O Space (29 Hex or 2D Hex). Commands are written to the first location and board status is read from the first location. The second location is used to read or write data. Without any power from the VMEbus, the AI-VSW-12FP can be operated in Manual Mode with a +12-Volt stand-by power supplied in the P2 user pins. A Manual User Interface consisting of two 16-position thumbwheel switches, a momentary pushbutton switch, a green and a red LED provides remote front

Applied Integration Corporation, 3930 West New York Drive, Tucson, AZ 85745. Tel: 520-743-3095; Fax: 520-623-1683.