AI-VSW-SS12 VME Video Cross-Point Switch
Source: Applied Integration Corporation
The AI-VSW-SS12 VME Video Cross-Point Switch is a 12-channel-input to 12-channel-output video cross-point switch configured on the VMEbus form-factor
The AI-VSW-SS12 VME Video Cross-Point Switch is a 12-channel-input to 12-channel-output video cross-point switch configured on the VMEbus form-factor. It provides the connection of any of 12 video input channels to any of 12 video output ports through a 12-by-12 cross-point switch. All input and output connectors are located on the rear of the switch. A micro-controller provides all of the operational functions of the system; an Eeprom is used to provide the non-volatile storage of cross-point configuration information used to restore the operational state of the system at power-on. With no power from the VMEbus, the AI-VSW-SS12 VME Video Cross-Point Switch can be operated in Manual Mode with a +12-Volt stand-by power supplied in the P2 user pins. A manual user interface consisting of two 16-position thumbwheel switches, a momentary pushbutton switch, a green and a red LED provides remote front-panel manual operation
Applied Integration Corporation, 3930 West New York Drive, Tucson, AZ 85745. Tel: 520-743-3095; Fax: 520-623-1683.