Product/Service

JEENI Features

Source: Embedded Performance, Inc. (EPI)
Non-intrusive, uses no target resources
  • Non-intrusive, uses no target resources
  • Supports ARM7 and ARM9 cores containing "DI" macrocells Does that include your core? Check the drop-down box in the banner.
  • Two hardware breakpoints
  • Unlimited software breakpoints
  • Ethernet and serial I/O ports for fast, flexible host interface
  • High-speed download (>50k bytes per second) of application code
  • Network compatibility allows shared and remote operation
  • Internal ARM 710A cached processor assures fast operation
  • Four status LEDs for observing operation
  • Flash memory for easy firmware updates to next generation ARM cores
  • External AC adapter compatible with all international power sources
  • Universal 5V connector
  • Fully compatible with the following debugging software
  • Allant ASPEX
  • ARM AXD
  • ARM SDT (containing ADW 2.11a)
  • ARM SDT (containing ADW 2.5)
  • EPI CCE-SDT (containing CADB)
  • EPI CCE-SDT25 (containing CADB25)
  • GNU gdb
  • Green Hills MULTI
  • MetaWare SeeCode
  • Microtec XRAY
  • VLSI JumpStart
  • Wind River Tornado

    Product Information
    Completely non-intrusive, the JEENI (JTAG EmbeddedICE EtherNet Interface) communicates with the ARM CPU core via JTAG using the boundary scan pins. It uses no target memory and requires no porting to the target system. Complete processor control means you can start, stop and single-step execution; read from and write to registers, memory, and system I/O; and download code to target RAM - all within the familiar EPI, ARM or VLSI debugger interfaces.
    The JEENI is a plug-and-play replacement for those using the ARM "BlackICE" EmbeddedICE JTAG interface. JEENI greatly speeds up the download of code to facilitate your test and debug efforts.
    The JEENI is ready to run with the CCE-SDT Integrated Development Environment and any development board that supports a JTAG interface to the ARM core. It provides an ethernet or serial connection to the host and a fast JTAG connection to the processor on the board. This combination of tools is designed to work together thereby providing you with a powerful working environment.
    The JEENI is available as a stand-alone unit or as a complete emulation kit. The kit comes with a UL/CE approved AC adapter, source-level debugger, cables, documentation, and one year of free maintenance, support, and upgrades.

    Embedded Performance, Inc. (EPI), 606 Valley Way, Milpitas, CA 95035-4138. Tel: 408-957-0350; Fax: 408-957-0307.