Raptor AT/2 Industrial Motherboard

The Raptor AT/2 is based on the Intel 440BX chipset, featuring a Baby-AT platform industrial long-life motherboard. It supports single Intel Celeron PPGA (Plastic Pin Grid Array) processors up to 533 Mhz, 66/100 MHz SDRAM concurrent PCI and Ultra DMA with 33 MB/s burst data transfer rate. It features a solid state flash device. It can be used for diskless workstations in harsh environments that are subject to shock and vibration. The solid state flash device is a Disk-on-Chip™ with a standard 32-pin DIP package and True FFS (True Flash File System) technology which can replace a standard hard disk that is often subject to data errors and easily damaged under these conditions.

The Raptor AT/2 features four 32-bit PCI slots and four 16-bit ISA slots, two USB headers, ULTRA-DMA/EIDE capability allowing high speed data transfer, and complete on-board I/O. It supports three on-board DIMM memory modules up to a total of 768MB registered or 384MB unregistered SDRAM.

Another industrial feature on this APC design, is the on-board ethernet controller. It's based on the Intel 82559 10 Base-T/100Mbits controller with support for Wake-On-Lan function that allows remote station wake-up for maintenance and power management.

Technical Specifications

Core Logic Chip-set	Intel™ 440BX chipset
Clock Speed	66 and 100MHz
Microprocessor	Socket PGA370 architecture supports Intel Celeron Processors up to 566MHz and Pentium III Processors up to 850 MHz
On board I/O	Two floppies with 2.88MB support Two RS-232 serial ports with 16 bytes FIFO 16550 UART One parallel port (bi-directional, ECP/EPP compatible) PS/2 mouse connector and a AT keyboard connector. Two Universal Serial Bus headers (USB) Dual-channel PCI 32-bit EIDE controller ULTRA-DMA up to 33MB/sec. LS120 drive support
Memory	Three banks (3 sockets) DIMM up to 384MB SDRAM and up to 768MB registered SDRAM
Disk-On-Chip (Optional Feature)	On-board single-chip flash disk device in a standard 32-pin DIP socket (Optional Feature) Up to 144MB of capacity with high-speed boot-up capabilities Flash File System included (FFS) Perfect HDD substitution for the harsh shock/vibration environment
Power Connector	AT and ATX power supply connectors
Industrial Devices	POST code display for self-diagnostics Second on-board fan header for temperature controlling Automatic CPU voltage and temperature monitoring device On-board 150, 600 and 1200ms hardware and software watchdog timer with VCC monitor
Power Management	Power button function: Intel advanced power management support Instant On, Touch On, press & hold to shut off power, etc
Ethernet (Optional Feature)	On-board 10 Base T/100Mbits with Wake-On-Lan function (Intel 82559)
RTC/CMOS RAM	114 bytes of extended CMOS RAM with RTC
BIOS	AMI (FLASH BIOS optional)
System Bus	Four 32-bit PCI slots and four 16-bit ISA slots
Board Dimension	Baby-AT footprint (8.6" x 13"), four layers FR4 PCB construction
Environmental Specifications	Temperature 0°C to +55°C - operating -40°C to +65°C - non-operating Humidity 5% to 95% @ 40°C

American Predator Corporation, 18630 Sutter Blvd., Morgan Hill, CA 95037. Tel: 408-776-7896; Fax: 408-776-7496.