The Raptor ATX/2 is based on the Intel 440BX chipset, featuring an ATX platform industrial Pentium II motherboard
The Raptor ATX/2 is based on the Intel 440BX chipset, featuring an ATX platform industrial Pentium II motherboard. It supports single Intel Celeron PPGA (Plastic Pin Grid Array) processors up to 533 MHz enabling AGP, 66/100 MHz SDRAM concurrent PCI and Ultra DMA with 33 MB/s burst data transfer rate. It features a solid state flash device. It can be used for diskless workstations in harsh environments that are subject to shock and vibration. The solid state flash device is a Disk-on-Chip™ with a standard 32-pin DIP package and True FFS (True Flash File System) technology which can replace a standard hard disk that is often subject to data errors and easily damaged under these conditions.
The Raptor ATX/2 offers one AGP slot delivering a maximum of 532MB/s 2x transfer mode which is quadruple the PCI speed, reducing the contention with the CPU and I/O devices by broadening the bandwidth of graphics to memory. It also offers an improvement in 3D graphics performance.
Along with the AGP slot, the Raptor ATX/2 features four 32-bit PCI slots and three 16-bit ISA slots, two USB headers, ULTRA-DMA/EIDE capability allowing high speed data transfer, and complete on-board I/O. It supports three on-board DIMM memory modules up to a total of 768MB registered or 384MB unregistered SDRAM.
Another industrial feature on this APC design, is the on-board ethernet controller. It's based on the Intel 82559 10 Base-T/100Mbits controller with support for Wake-On-Lan function that allows remote station wake-up for maintenance and power management.
American Predator products are specifically engineered to operate under diverse temperature ranges, dust, vibration and shock conditions. APC guarantees product longevity of five to eight years of production life cycle for all designs.
Technical Specifications
| Core
Logic Chip-set |
Intel™ 440BX
chipset
|
| Clock
Speed |
66 and 100MHz
|
| Microprocessor
|
Socket PGA370
architecture supports Intel Celeron and Pentium III Processors up to 850MHz
|
| On
board I/O |
I/O connector
box (Intel core design #1) Two floppies with 2.88MB support Two RS-232
serial ports with 16 bytes FIFO 16550 UART One parallel port (bi-directional,
ECP/EPP compatible) PS/2 mouse and PS/2 keyboard connectors Two Universal
Serial Bus ports (USB) Dual-channel PCI 32-bit EIDE controller ULTRA-DMA
up to 33MB/sec. LS120 drive support
|
| Memory
|
Three banks
(3 sockets) DIMM up to 384MB SDRAM and up to 768MB registered SDRAM
|
Disk-On-Chip
(Optional Feature)
|
Two on-board
single-chip flash disk device in a standard 32-pin DIP socket (Optional
Feature) Up to 144MB of capacity with high-speed boot-up capabilities
Flash File System included (FFS) Perfect HDD substitution for the harsh
shock/vibration environment
|
| Power
Connector |
ATX power
supply connector |
| Industrial
Devices |
POST code
display for self-diagnostics Second on-board fan header with temperature
controlled on/off automatic CPU voltage and temperature monitoring device.
On-board 150, 600 and 1200ms hardware and software watchdog timer with
VCC monitor |
| Power
Management |
Power button
function: Instant On, Touch On, press & hold 4 seconds to shut off power,
etc |
Ethernet
(Optional Feature) |
On-board
10 Base T/100Mbits with Wake-On-Lan function (Intel 82559ER) |
| RTC/CMOS
RAM |
114 bytes
of extended CMOS RAM with RTC |
| BIOS
|
AMI
|
| System
Bus |
One AGP
2x, four 32-bit PCI slots and three 16-bit ISA slots |
| Board
Dimension |
ATX footprint
(8" x 12.0"), four layers FR4 PCB construction |
| Environmental
Specifications |
Temperature
0°C to +55°C - operating
-40°C to +65°C - non-operating
Humidity
5% to 95% @ 40°C |
American Predator Corporation, 18630 Sutter Blvd., Morgan Hill, CA 95037. Tel: 408-776-7896; Fax: 408-776-7496.
