Single/Dual Coppermine-256 Embedded Pentium compactPCI Computer
Source: General Micro Systems, Inc.
The C2P4 supports Single or Dual Coppermine-256 Pentium processors up to 850MHz and 100MHz Front Side Bus
The C2P4 "Atlas" has complete workstation server functionality. The C2P4 supports Single or Dual Coppermine-256 Pentium processors up to 850MHz and 100MHz Front Side Bus, up to 1GB of low cost SDRAM with Error Correction Code(ECC), 256KB of On-Die L2 Cache clocked at CPU speed for each processor, Ultra Wide SCSI, AGP Graphics with 4MB RAM, Dual 10/100Base-Tx Ethernet, Primary/Secondary Ultra DMA-33 IDE, Dual USB, up to 440MB SanDisk Flash IDE, 512KB of Serial ROM for VxWorks boot parameters, Floppy, Real-Time Clock, 2 Comm Ports, 1 Parallel Port, Keyboard/Mouse Ports, AMI Flash BIOS with Power-On-Self-Test (POST) LED's. The C2P4 is available in system master or peripheral master versions. (An optional 80mm Rear Panel I/O Transition Module is available.)
General Micro Systems, Inc., P.O. Box 3689, 8358 Maple Place, Rancho Cucamonga, CA 91730. Tel: 909-980-4863; Fax: 909-987-4863.